Long-term precipitation and stream discharge records at seven forested experimental watersheds along a latitudinal transect in Japan: Jozankei,Kamabuchi, Takaragawa,Tsukuba, Tatsunokuchi-yama,Kahoku and Sarukawa     

Takanori Shimizu  Koji Tamai  Ikuhiro Hosoda  Shoji Noguchi  Yuji Kominami  Toshio Abe  Kenzo Kitamura  Ushio Kurokawa  Delphis F. Levia  Tayoko Kubota  Naoki Kabeya  Shin'ichi Iida  Tatsuhiko Nobuhiro  Shinji Sawano  Sho Iwagami  Akira Shimizu  Yoshio Tsuboyama 《水文研究》2021,35(10):e14376

This data note introduces a database of long-term daily total precipitation and stream discharge data for seven forested watersheds in Japan that have been continuously monitored by the Forestry and Forest Products Research Institute. Three of the watersheds started data collection in the 1930s. Forest cover across the sites ranges from cool to warm temperate regions with the latitude spanning from 31 to 44° N and annual precipitation ranging from 1200 to 3000 mm yr⁻¹. The effects of vegetation change via clearcutting, thinning and forest fire (among other stressors) on stream discharge can be analysed from the long-term observation sites. Moreover, this multi-site dataset allows for inter- and intra-site comparisons of annual water loss (difference of annual precipitation and stream discharge). These long-term datasets can provide comprehensive insights into the effects of climate change and other stressors on forested ecosystems, not only in Japan but across a spectrum of forest types, if combined with other long-term records from other forested watersheds across the world.  相似文献   

Investigation on piezoelectric lead zirconate titanate detector bombarded obliquely with hypervelocity iron particles     

S. Takechi  T. Onishi  T. Miyachi  N. Hasebe  K. Nogami  S. Sasaki  T. Iwai  R. Srama 《Planetary and Space Science》2008,56(9):1309-1313

A cosmic dust detector for use onboard a satellite is currently being constructed from piezoelectric lead zirconate titanate (PZT). The characteristics of the PZT detector were studied by bombarding it with hypervelocity iron particles, which were supplied by a Van de Graaff accelerator. There was a linear relationship between the rise time of the signal observed from the detector and the particle's velocity, which was above 10 km/s on impact. It was also found that the rise time was almost independent of the collisional angle between the particles and the PZT surface within the limits of the particle's parameters used in this experiment.  相似文献   

http://dx.doi.org/10.1016/j.gsf.2016.04.002   总被引：1，自引：1，他引：0  

Takanori Sasaki  Toshikazu Ebisuzaki 《地学前缘(英文版)》2017,8(2):215-222

Population synthesis studies into planet formation have suggested that distributions consistent with observations can only be reproduced if the actual Type Ⅰ migration timescale is at least an order of magnitude longer than that deduced from linear theories.Although past studies considered the effect of the Type I migration of protoplanetary embryos,in most cases they used a conventional formula based on static torques in isothermal disks,and employed a reduction factor to account for uncertainty in the mechanism details.However,in addition to static torques,a migrating planet experiences dynamic torques that are proportional to the migration rate.These dynamic torques can impact on planet migration and predicted planetary populations.In this study,we derived a new torque formula for Type Ⅰ migration by taking into account dynamic corrections.This formula was used to perform population synthesis simulations with and without the effect of dynamic torques.In many cases,inward migration was slowed significantly by the dynamic effects.For the static torque case,gas giant formation was effectively suppressed by Type I migration;however,when dynamic effects were considered,a substantial fraction of cores survived and grew into gas giants.  相似文献   

Subsidence of the Miyako‐Sone submarine carbonate platform,east of Miyako‐jima Island,northwestern Pacific Ocean     

Kohsaku Arai  Hideaki Machiyama  Shun Chiyonobu  Hiroki Matsuda  Keiichi Sasaki  Marc Humblet  Yasufumi Iryu 《Island Arc》2014,23(1):1-15

Bathymetric mapping and observations of the seafloor using a remotely operated vehicle (ROV, Hyper‐Dolphin 3K) were carried out on the slopes of the Miyako‐Sone submarine platform, east of Miyako‐jima in the Ryukyu Islands, northwestern Pacific Ocean. The bathymetric map indicates that terraces are present at water depths of approximately 140 m, 330 m, 400 m, and 680 m on the northwestern slope of the platform. A number of NW–SE trending lineaments, probably faults, extend perpendicular to the axis of the Ryukyu Island Arc. Two ROV surveys were conducted at water depths ranging from 519 m (on the slope) to 121 m (shallowest part of the platform). The surveys revealed that well‐indurated carbonate rocks are exposed at terrace margins and on upper slopes, and that the lower slopes are covered with modern sediments consisting of unconsolidated, coarse‐sand‐sized bioclastic carbonates. Calcareous nannofossils from the well‐indurated carbonate rocks indicate a Middle–Late Pleistocene age, which suggests that the rocks correlate with the Quaternary reef and fore‐reef deposits of the Ryukyu Group (Ryukyu Limestone) on the Ryukyu Islands. No siliciclastic deposits corresponding to the upper Miocene–lower Pleistocene Shimajiri Group (as exposed on Okinawa‐jima and Miyako‐jima islands) were recovered during the surveys. Coeval well‐indurated carbonate rocks, all of which formed in a similar sedimentary environment, have been downthrown towards the west due to displacements on the western sides of normal faults. Subsidence of the Miyako‐Sone submarine platform was the result of large vertical displacements on such normal faults. The timing of initial subsidence cannot be tightly constrained, but the presence of the youngest limestone at progressively lower levels towards the west suggests the subsidence continued until after 0.265 Ma.  相似文献   

Deep water observations of extreme waves with moored and free GPS buoys   总被引：1，自引：1，他引：0  

Takuji Waseda  Masato Sinchi  Keiji Kiyomatsu  Tomoya Nishida  Shunsuke Takahashi  Sho Asaumi  Yoshimi Kawai  Hitoshi Tamura  Yasumasa Miyazawa 《Ocean Dynamics》2014,64(9):1269-1280

Point-positioning GPS-based wave measurements were conducted by deep ocean (over 5,000 m) surface buoys moored in the North West Pacific Ocean in 2009, 2012, and 2013. The observed surface elevation bears statistical characteristics of Gaussian, spectrally narrow ocean waves. The tail of the averaged spectrum follows the frequency to the power of ?4 slope, and the significant wave height and period satisfies the Toba’s 3/2 law. The observations compare well with a numerical wave hindcast. Two large freak waves exceeding 13 m in height were observed in October 2009 and three extreme waves around 20 m in height were observed in October 2012 and in January 2013. These extreme events are associated with passages of a typhoon and a mid-latitude cyclone. Horizontal movement of the buoy revealed that the orbital motion of the waves at the peak of the wave group mostly exceed the weakly nonlinear estimate. For some cases, the orbital velocity exceeded the group velocity, which might indicate a breaking event but is not conclusive yet.  相似文献   

Quasi-stationary striations in basin-scale oceanic circulation: vorticity balance from observations and eddy-resolving model     

Oleg V. Melnichenko  Nikolai A. Maximenko  Niklas Schneider  Hideharu Sasaki 《Ocean Dynamics》2010,60(3):653-666

Recently, prominent jet-like features of the ocean circulation, called striations, with a meridional scale of O(300–500 ;km) and extending for thousands of kilometers in length, have been detected in satellite and in situ observations and in high-resolution numerical models. In this paper, we study quasi-stationary striations, which are best seen in the multi-year time-averaged velocity fields. Using 1993–2002 mean dynamic ocean topography, satellite altimeter observations, and output of the Ocean General Circulation Model for the Earth Simulator, the dynamics of the quasi-stationary striations in the eastern parts of the subtropical North and South Pacific are examined by assessing individual terms in the time-averaged equations of relative and potential vorticity. While non-linear effects are found to be essential in the dynamics of the striations, rejecting some linear hypotheses forwarded in the earlier studies, the relevance of the Rhines mechanism is not confirmed. Eddy flux does not act as a relative vorticity source for the striations. Using the potential vorticity (PV) diagnostics, we show that the time-mean PV is not conserved along the time-mean streamlines, and on the scale of the striations these changes in PV are largely induced by the eddy flux of layer thickness. The fact that eddy fluxes contribute to the striations’ time-mean PV budget suggests that the striations are not a kinematical artifact of time-averaging of westward-propagating eddies.  相似文献   

Predicting the displacement of triple pendulum™ bearings in a full‐scale shaking experiment using a three‐dimensional element     

Nhan D. Dao  Keri L. Ryan  Eiji Sato  Tomohiro Sasaki 《地震工程与结构动力学》2013,42(11):1677-1695

The accuracy of a series spring model to predict the peak displacement and displacement history of Triple Pendulum? (TP) bearings in a strongly shaken, full‐scale building is evaluated in this paper. The series spring model was implemented as a self‐contained three‐dimensional TP bearing element in OpenSees and is now available for general use. The TP bearing element contains the option for constant friction or a generalized friction model that accounts for the effect of instantaneous velocity and compression load on the friction coefficient. Comparison between numerical simulation and experimental data of a five‐story steel moment frame building shows that the peak displacement of isolation system can generally be predicted with confidence using a constant friction coefficient model. The friction coefficient model accounting for the effect of axial load and velocity leads to minor improvement over the constant friction coefficient models in some cases. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Distribution of local Cs anomalies on the seafloor near the Fukushima Dai-ichi Nuclear Power Plant     

Blair Thornton  Seiki Ohnishi  Tamaki Ura  Naoteru Odano  Shun Sasaki  Tsuneo Fujita  Tomowo Watanabe  Kaoru Nakata  Tsuneo Ono  Daisuke Ambe 《Marine pollution bulletin》2013

An estimated 3.5 ± 0.7 × 10¹⁵ Bq of ¹³⁷Cs is thought to have been discharged into the ocean following the melt down at Fukushima Dai-ichi Nuclear Power Plant (F1NPP). While efforts have been made to monitor seafloor radiation levels, the sampling techniques used cannot capture the continuous distribution of radionuclides. In this work, we apply in situ measurement techniques using a towed gamma ray spectrometer to map the continuous distribution of ¹³⁷Cs on the seafloor within 20 km of the F1NPP. The results reveal the existence of local ¹³⁷Cs anomalies, with levels of ¹³⁷Cs an order of magnitude higher than the surrounding seafloors. The sizes of the anomalies mapped in this work range from a few meters to a few hundreds of meters in length, and it is demonstrated that the distribution of these anomalies is strongly influenced by meter scale features of the terrain.  相似文献   

Correlation of large displacement drained shear strength of landslide soils measured by direct shear and ring shear devices   总被引：2，自引：0，他引：2  

Shriwantha Buddhi Vithana  Shinya Nakamura  Seiichi Gibo  Anshun Yoshinaga  Sho Kimura 《Landslides》2012,9(3):305-314

Based on a laboratory study of drained direct shear tests of remoulded, pre-cut and polished specimens and drained ring shear tests of uncut and remoulded specimens of slip surface materials of five landslide soils, significant correlations of the mobilized shear strength parameters, cohesion (c, c _r) and internal friction angle (Φ, Φ_r), are proposed. The investigated soils consisted of the slip surface material belonging to tuffaceous clay, mudstone, loess and siltstone. Most of the previous studies on residual shear strength measured by reversal direct shear and ring shear devices have obtained significantly different results using the two devices, even when pre-cut and polished specimens were used in the direct shear device. In this study, the residual shear strength values of remoulded specimens measured by a ring shear device are shown to significantly correlate with the drained large displacement shear strength values of remoulded specimens, which were measured using pre-cut and polished specimens in a direct shear device. The correlation between the cohesion measured in the two shear devices is expressed by the linear relationship, $ {c_{\text{r}}} = 0.{7394}c - {6}.{6857} $ , while the correlation between the friction angle measured in the two devices is expressed by the linear relationship, $ {\Phi_{\text{r}}} = {1}.0{852}\Phi - {6}.0{247} $ . The proposed linear correlations for effective cohesion (c′) and effective friction angle (Φ′) have yielded significant coefficients of determination within an effective normal stress range of 30–150?kN/m².  相似文献   

Performance of dry-separation processes in the recovery of cenospheres from fly ash and their implementation in a recovery unit     

H.T.B.M. Petrus  Tsuyoshi Hirajima  Yuji Oosako  Moriyasu Nonaka  Keiko Sasaki  Takashi Ando 《International Journal of Mineral Processing》2011,98(1-2):15-23

Cenospheres recovery is one of the coal fly ash beneficiations, providing economic as well as environmental benefits. Current techniques, such as lagoon or other wet-separation processes, consume large amounts of water and add to water pollution due to leaching of toxic materials from fly ash. The other possible disadvantage is the need for a wide operational area, which is unsuitable for densely populated countries. As wet-separation processes have some disadvantages, an improved and/or sustainable alternative recovery technique is required. An air classifier is one of the alternative techniques. In this study, two types of air classifiers, namely a closed-type pneumatic separator and a micron separator, have been investigated. In terms of separation efficiency, it was found that the micron separator has the potential to be applied in cenospheres recovery from coal fly ash, giving a Newton's efficiency of 0.44, as compared to a value of about 0.26 for the closed-type pneumatic separator. The cenospheres recoveries of both pieces of equipment at their optimum Newton's efficiencies were similar at over 60 wt.%. The separation performance was further assessed from the particle distributions of the overflow and underflow products obtained from both pieces of equipment, as well as from SEM images. It was found that the lower Newton's efficiency of the closed-type pneumatic separator was due to the re-concentration of fine particles in the underflow product at air-flow rates higher than 2.2 m/s (the underflow product yield was about 55 wt.%).In order to further confirm the applicability of this technique, the micron separator, which had provided higher separation efficiency and cenospheres recovery, was deployed in a cenospheres recovery unit prior to the use of a wet-separation process (float and sink tank). About 80% of the cenospheres was recovered, with an 87.8% reduction in the total mass of fly ash to be separated in the float and sink tank. Consequently, much less water was needed for the process of cenospheres recovery. Moreover, it was also confirmed that the micron separator could yield higher quality fly ashes, that is, fly ash types I and II, from lower feed quality of fly ash type IV, which is the lowest category in commercial classification of fly ash according to JIS A6201.  相似文献